3=Use the field below to specify the folder where you want the application files to be copied to. To specify a different folder, type a new name, or use the Browse button to select an existing folder. Press Next to continue.
4=Please wait while %s is setup on your computer.\n
5=
6=%s was successfully setup on your computer. Press Finish to exit setup.
[Setup_Wizard_Label]
0=
1=
2=
3=
4=
5=
6=Launch the Application
[Welcome_Wizard]
0=Welcome
1=License Agreement
[Splash_Screen_Window]
0=Setup
[Message72800]
1=InstallConstruct - Choose Folder Location
20=Directories
21=Drives
[Message90388]
1=Confirm
2=%s has not been setup. Are you sure you want to exit?
[Message90288]
1=Error
2=Setup has internal error. Please contact your software provider for help.
[Message70000]
1=InstallConstruct - Request
2=Please specify the path to which items will be extracted. You may also press the Browse button to select an existing path. Paths must include a drive letter or be a UNC name.
[Message70100]
1=InstallConstruct - Request
2=The file indicated below already exists. Press "Yes" if you want to overwrite the file. Press "No" if you don't want to overwrite the file. Press "Cancel" if you want to stop extracting items.
[Message70200]
1=InstallConstruct - Request
2=The file indicated below already exists and is Read-Only. Press "Yes" if you want to overwrite the file. Press "No" if you don't want to overwrite the file. Press "Cancel" if you want to stop extracting items.
[Message70300]
1=InstallConstruct - Request
2=The file indicated below has an earlier version number or date than the one already on your system. Press "Yes" if you want to replace the file. Press "No" if you don't want to replace the file. Press "Cancel" if you want to stop extracting items.
[Message70400]
1=InstallConstruct - Request
2=Please enter the password(s) needed to extract the items. Press "OK" to continue or "Cancel" to stop extracting items.
[Message70500]
1=InstallConstruct - Extraction Progress
2=The status below shows what percentage of the items has been extracted.
[Message70600]
1=InstallConstruct - Extraction Progress
2=The status below shows what percentage of the items has been extracted. Press "Cancel" to stop extracting items.
[Message70700]
1=InstallConstruct - Error
2=The path indicated below could not be created or does not already exist. Try specifying a different path.
[Message70800]
1=InstallConstruct - Error
2=The file indicated below could not be overwritten.
[Message70900]
1=InstallConstruct - Error
2=The file indicated below is a Read-Only file and could not be overwritten.
[Message71000]
1=InstallConstruct - Error
2=The password you specified was incorrect. Press "Cancel" to stop extracting items. Press "Ignore" to skip over the password-protected item.
[Message71100]
1=InstallConstruct - Error
2=One or more of the programs that were suppose to run could not be found. Please contact your software provider for help.
[Message71300]
1=InstallConstruct - Error
2=The custom registry information file that was supposed to be merged with the system registry could not be found. Please contact your software provider for help.
[Message71400]
1=InstallConstruct - Error
2=The item indicated in the field below could not be registered. Please contact your software provider for help.
[Message71500]
1=InstallConstruct - Error
2=The end of the Self-Extracting zip file was reached before all of the items could be properly extracted. This Self-Extracting zip file may be damaged. Please obtain a fresh copy and try again.
[Message71600]
1=InstallConstruct - Error
2=The extraction process did not complete successfully. This may have been caused by an operator Cancel or other error. Please contact your software provider for help.
[Message71700]
1=InstallConstruct - Error
2=Your system does not have enough available memory to successfully extract the items from this Self-Extracting zip file. Please contact your software provider for help.
[Message71800]
1=InstallConstruct - Error
2=The extraction process was cancelled before all of the items were extracted. You may need to run the extraction process again.
[Message71900]
1=InstallConstruct - Error
2=The file indicated below could not be extracted. It may already be in use by the system or locked by another application. It will be skipped.
[Message72000]
1=InstallConstruct - Error
2=An error occurred during the extraction process. The archive file(s) may be damaged. Please obtain a fresh copy and try again.
[Message72100]
1=InstallConstruct - Error
2=While extracting items a data error has occurred. This Self-Extracting zip file may be damaged. Please obtain a fresh copy and try again.
[Message72200]
1=InstallConstruct - Error
2=While extracting items there wasn't enough room on the destination drive. You may need to remove some files before you can extract all of the items.
[Message72300]
1=InstallConstruct - Warning
2=While extracting items from the Self-Extracting zip file some items were skipped.
[Message72400]
1=InstallConstruct - Information
2=All items were successfully extracted.
[Message72500]
1=Initialize
2=Preparing for Setup Wizard. Please Wait.
[Message72600]
1=InstallConstruct - Error
2=An error was encountered while preparing for extraction. Please contact your software provider for help.
[Message73000]
1=InstallConstruct - Error
2=An error occurred while attempting to install shortcuts.
[Message72900]
1=InstallConstruct - Select Group for Shortcuts
20=Enter or select a group name for installing shortcuts.
[Message73100]
1=InstallConstruct - Request
2=One or more files were installed that require your system to be restarted.
20=Restart &Now
21=Restart &Later
[Message73200]
1=InstallConstruct - Request
2=Please insert Volume Number %d into the drive indicated below:
[Message73300]
1=InstallConstruct - Error
2=You have inserted the wrong Volume. Please check the media and try again.
[Message73400]
1=InstallConstruct - Error
2=The disk is not ready for access. Please check to make sure that the media is write enabled and properly inserted into the drive.
[Message71200]
1=InstallConstruct - Error
2=Missing cabinet file(s).
[Button0]
900=&OK
901=&Cancel
903=&Yes
904=&No
906=Yes To &All
905=&Browse
902=&Ignore
911=Network...
912=&Abort
[Uninstall_Messages]
0=Uninstaller
1=The uninstall program will remove files and folders, shortcuts, and registry entries from the disk. Are you sure you want to uninstall?
2=One of components is active. Exit the program before starting Uninstall.
3=Uninstall successfully!
4=An error occurred while trying to uninstall the program. Uninstall has been canceled.
